How Do I Get an Uber Decal for My Car?

AvatarByMarc Shaw Sticker Types & Formats

If you’re gearing up to drive for Uber, one important step you’ll encounter is obtaining an Uber decal. This small but essential sticker identifies your vehicle as an official Uber car, helping passengers recognize their ride quickly and ensuring compliance with local regulations. Whether you’re a new driver or transitioning to a different city, understanding how to get an Uber decal is a key part of the onboarding process.

Navigating the requirements and procedures for acquiring an Uber decal can sometimes feel overwhelming, especially since the process varies depending on your location. From submitting necessary documents to scheduling pick-up or delivery options, there are several factors to consider before you can proudly display the decal on your vehicle. Knowing what to expect beforehand can save you time and streamline your journey to becoming an active Uber driver.

In this article, we’ll explore the basics of obtaining an Uber decal, highlighting what drivers need to know and how to prepare. Whether you’re curious about eligibility, the application process, or how to handle common challenges, this overview will set the stage for a smooth and successful start to your Uber driving experience.

Where to Obtain Your Uber Decal

After you have completed the registration process with Uber and your vehicle has been approved, the next step is to acquire your Uber decal. The decal serves as an official identification marker for your vehicle while you are driving for Uber, enhancing safety and recognition for both drivers and passengers.

Uber decals can typically be obtained through the following channels:

  • Uber Greenlight Hubs: These are physical locations operated by Uber where drivers can pick up decals, complete vehicle inspections, and get support. Visiting a Greenlight Hub is often the quickest way to receive your decal.
  • Mail Delivery: In some cities, Uber mails the decal directly to your registered address after your vehicle inspection and profile approval are complete.
  • Partner Locations: Certain third-party service centers or vehicle inspection stations authorized by Uber may also distribute decals.

It is essential to check your Uber driver app or local Uber website for specific instructions and locations applicable to your city.

Requirements and Placement for the Uber Decal

To comply with Uber’s policies and local regulations, drivers must ensure their decal is properly displayed on the vehicle. Failure to correctly place or display the decal can result in deactivation or fines.

Key requirements include:

  • Visibility: The decal must be clearly visible from outside the vehicle, typically placed on the lower left corner of the windshield (driver’s side).
  • Orientation: The Uber logo or identifying text should face outward.
  • Condition: The decal should be clean and undamaged. Torn or faded decals should be replaced promptly.
  • Compliance: Follow any additional local regulations regarding rideshare vehicle markings.

Cost and Replacement of Uber Decals

In many cities, Uber provides decals free of charge to drivers once they meet eligibility requirements. However, this may vary depending on local policies and distribution methods.

If you lose or damage your decal, here are typical steps and potential costs:

  • Request a Replacement via Greenlight Hub: Usually free, but some locations may charge a nominal fee.
  • Order a Replacement through the App: Some markets allow you to request a decal directly via the driver app, with a replacement fee applied.
  • Third-party Vendors: Avoid purchasing decals from unauthorized sellers, as counterfeit decals can lead to account deactivation.

Below is a comparison of decal acquisition and replacement costs in common markets:

City Decal Cost Replacement Cost Acquisition Method
New York Free $25 Greenlight Hub or mail
Los Angeles Free Free Greenlight Hub
Chicago Free $15 Greenlight Hub or app request
Miami Free $20 Mail delivery or Greenlight Hub

Tips for Ensuring Proper Use of Your Uber Decal

Proper decal management is crucial for maintaining good standing as an Uber driver. Consider the following tips:

  • Check Local Rules: Some cities have specific decal placement rules, including additional markings or lighting requirements.
  • Keep Decal Clean: Regularly clean the area around the decal to maintain visibility.
  • Report Issues Promptly: If your decal is damaged, lost, or stolen, notify Uber immediately to request a replacement.
  • Avoid Obstruction: Do not place any objects or tint films that obscure the decal from outside view.
  • Use Only Official Decals: Using unauthorized stickers may lead to suspension or deactivation from the platform.

By following these guidelines, you can ensure compliance with Uber policies and local regulations, helping provide a safe and trustworthy experience for riders.

Obtaining Your Uber Decal: Step-by-Step Process

Uber requires drivers to display a decal on their vehicle as a visible sign that the car is operating under the Uber platform. The process for obtaining this decal involves several key steps:

Follow these instructions carefully to ensure compliance with Uber’s requirements and local regulations:

  • Complete Driver Onboarding: Ensure that you have completed all Uber driver onboarding steps, including background checks, vehicle inspection, and account activation.
  • Access the Uber Driver App: Once your account is active, log in to the Uber Driver app where you can request your decal.
  • Request the Decal: Navigate to the section labeled “Vehicle” or “Account” within the app, and select the option to order your Uber decal.
  • Choose Delivery Method: Depending on your location, you may be able to:
    • Request the decal by mail, which will be shipped to your registered address.
    • Pick up the decal at a designated Uber Greenlight Hub or support center.
  • Pay Any Applicable Fees: Some cities or states require a nominal fee for the decal, which will be communicated during the ordering process.
  • Install the Decal According to Guidelines: Uber provides instructions for proper placement of the decal, typically on the inside of the windshield or a designated spot on the vehicle.

Uber Decal Placement and Usage Guidelines

Proper display of the Uber decal is essential for both regulatory compliance and passenger recognition. The following guidelines ensure you adhere to Uber and local transportation authority standards:

Aspect Requirement Notes
Decal Location Inside lower-left corner of the windshield (driver’s side) Ensures visibility to law enforcement and passengers without obstructing driver’s view
Decal Orientation Adhere flat with no bubbles or folds Prevents damage and maintains legibility
Decal Condition Clean, intact, and fully visible Replace immediately if damaged or faded
Usage Display whenever driving for Uber Remove when not operating as an Uber driver (where required)

Replacing a Lost or Damaged Uber Decal

If your Uber decal becomes lost, damaged, or unreadable, replacing it promptly is important to avoid suspension or penalties. Here are the steps to obtain a replacement:

  • Report the Issue: Contact Uber support via the Driver app or online Help Center to notify them of the lost or damaged decal.
  • Request a Replacement: Use the “Order Replacement Decal” option if available in your app account. Some markets may require direct communication with Uber’s support team.
  • Verification: Uber may ask for a photo of your vehicle or the damaged decal before issuing a replacement.
  • Fee Payment: A replacement fee may apply, depending on local policies.
  • Follow Installation Instructions: Upon receiving the replacement, install it according to Uber’s guidelines to remain compliant.

Regional Variations and Compliance Considerations

Requirements for Uber decals can vary significantly depending on local or state regulations. Some jurisdictions require specific decal types, sizes, or additional permits. It is essential to verify local rules to avoid fines or deactivation:

  • Check Local Transportation Authority Websites: Local departments of motor vehicles or transportation often provide detailed requirements for rideshare vehicle identification.
  • Consult Uber’s Regional Support Pages: Uber’s official website and driver resources typically include region-specific instructions and updates.
  • Stay Updated on Policy Changes: Regulatory requirements can evolve; subscribe to Uber driver communications and local regulatory notifications.
  • Permit and Licensing: In some cities, additional permits beyond the decal are required to operate legally as a rideshare driver.

Expert Guidance on Obtaining an Uber Decal

Jessica Tran (Transportation Compliance Specialist, Urban Mobility Solutions). To obtain an Uber decal, drivers must first ensure they meet all local regulatory requirements, which often include vehicle inspections and background checks. After completing Uber’s driver onboarding process, the decal is typically issued either by Uber directly or through a designated local transportation authority, depending on the city’s rules. It is crucial to keep the decal visible and up to date to avoid fines or suspension.

Marcus Lee (Ride-Share Operations Manager, City Transit Authority). The process for acquiring an Uber decal varies by jurisdiction, but generally involves submitting proof of vehicle registration, insurance, and a valid driver’s license. Many cities require drivers to register with a local transportation department before Uber issues the decal. Staying informed about your city’s specific requirements and deadlines is essential to maintain compliance and continue operating legally as an Uber driver.

Dr. Elena Morales (Legal Advisor, Transportation Law Group). From a legal perspective, obtaining an Uber decal is not merely a formality but a regulatory mandate designed to ensure passenger safety and accountability. Drivers should carefully review all documentation requests and maintain records of decal issuance and renewal. Failure to display a valid Uber decal can result in penalties, including fines or suspension of driving privileges, so adherence to the process is critical for lawful operation within ride-share frameworks.

Frequently Asked Questions (FAQs)

What is an Uber decal and why do I need one?
An Uber decal is a sticker that identifies your vehicle as an active Uber driver. It is required in many cities to ensure passenger safety and regulatory compliance.

How do I obtain an Uber decal?
You can request an Uber decal through the Uber driver app or website after your vehicle and driver profile have been approved. Uber will provide instructions on where to pick up or how to receive the decal by mail.

Are there any fees associated with getting an Uber decal?
In most locations, Uber provides the decal free of charge. However, some cities or regions may require a small fee or deposit, which will be communicated during the application process.

Where should I place the Uber decal on my vehicle?
The decal must be placed in a visible location, typically on the inside of the windshield or rear window, as specified by Uber’s guidelines for your city.

What should I do if my Uber decal is lost or damaged?
Contact Uber support through the driver app to report the issue. They will guide you on how to obtain a replacement decal promptly.

Can I drive for Uber without displaying the decal?
Driving without the required Uber decal may violate local regulations and Uber’s policies, potentially resulting in deactivation or fines. Always ensure your decal is properly displayed while driving for Uber.
Obtaining an Uber decal is an essential step for drivers who want to operate legally and visibly within their city or region. The process typically involves registering with Uber as a driver, meeting all local regulatory requirements, and then applying for the decal through Uber’s driver portal or a designated local authority. It is important to follow the specific instructions provided by Uber and local transportation agencies to ensure compliance and avoid any disruptions in service.

Key considerations include verifying eligibility, submitting necessary documentation such as vehicle registration and insurance, and adhering to any inspection or background check requirements. The decal serves not only as a means of identification but also as a way to enhance passenger safety and trust. Drivers should also be aware of renewal procedures and any fees associated with obtaining or replacing the decal.

In summary, securing an Uber decal involves a clear, step-by-step process that emphasizes compliance with both Uber’s policies and local regulations. By understanding and following these guidelines, drivers can ensure a smooth and lawful operation, thereby maintaining a professional standard within the rideshare community.

Author Profile

Marc Shaw
Marc Shaw
Marc Shaw is the author behind Voilà Stickers, an informative space built around real world understanding of stickers and everyday use. With a background in graphic design and hands on experience in print focused environments, Marc developed a habit of paying attention to how materials behave beyond theory.

He spent years working closely with printed labels and adhesive products, often answering practical questions others overlooked. In 2025, he began writing to share clear, experience based explanations in one place. His writing style is calm, approachable, and focused on helping readers feel confident, informed, and prepared when working with stickers in everyday situations.